Principle and Introduction of Central Air Conditioning Cooli

The inlet temperature of cooling water should generally not exceed 32 ℃, and cooling water mainly refers to the water used for condenser and compressor cooling. Many users may not be very familiar with the issues related to the central air conditioning water system. Below is an introduction to the central air conditioning cooling water system brought by the editor of Shenzhen Bondrui manufacturer. （1） Direct flow cooling water system The simplest cooling water system is a direct flow water supply system, which means that the heated cooling return water is dir...

Principle and Introduction of Water Cooling System for Air C

The main components of a water-cooled air compressor include a drive motor, a main unit with a positive and negative rotor, an oil-gas separator, an oil filter, a minimum pressure valve, an intake load reduction valve, a safety valve, a water-cooled cooler, an oil cooler, etc. The structural difference from air-cooled air compressors is the water-cooled cooler and oil cooler. The diagram shows the process flow of a water-cooled compressor system. Most equipment manufacturers require that the circulating cooling water for compressed air units be kept clean and free ...

Electric hydraulic hammer cooling system and principle

The electric hydraulic hammer uses closed cooling to achieve good results, and the oil temperature of the hydraulic oil is maintained at (40 ℃ 2) ...

Cooling system and schematic diagram of intermediate frequen

The cooling system and schematic diagram of the intermediate frequency furnace. The electric furnace and power supply adopt independent cooling devices. The intermediate frequency power supply adopts a fully enclosed cooling device, and the furnace body adopts a fully enclosed cooling device. ...