A Brief Discussion on the Classification and Advantages of C[ 2025-06-10 ]

Jiangsu cooling tower, Jiangsu cooling tower manufacturers, cooling tower manufacturers, stainless steel cooling towers, glass fiber reinforced plastic cooling towers, specializing in the production of cooling towers. A, countercurrent tower: 1, water in the tower packing, water from top to bottom, air from bottom to top, the two flow to the opposite kind of cooling tower. 2. The counterflow cooling tower has good thermal performance and is divided into three cooling sections: (1) from the water distributor to the packing top, the water temperature in this section

Precautions for installation and use of cooling tower[ 2025-06-10 ]

Installation and usage precautions 1. It should be placed in a well ventilated and clean place. 2. The inlet pipe of the cross flow tower is installed on both sides and connected to the water distribution tank. Users should install butterfly valves at the connection point to regulate the flow rate. The inlet pipe can be introduced from the main pipe below, or the main pipe can be placed on the tower. At this time, the pipe support should be placed on the bracket on the side of the cooling tower. The outlet pipe can be connected to the tower bottom water tank in any

Installation, commissioning, and usage instructions for cool[ 2025-06-10 ]

1. The direction of the inlet and outlet pipes of a small counter current tower can be arbitrarily selected in a horizontal position, but it must not collide with the foundation. If there is a foundation in the middle, its load should be 25% of the operating weight, and the remaining 75% should be evenly borne by the peripheral rectangular foundation. If installed on the roof, the additional pressure caused by the load should be considered. 2. A bracket should be installed at the connection between the cooling tower and the inlet and outlet pipes to prevent excessi