Fiberglass cooling equipment promotes the formation of new e

Fiberglass cooling tower is a large-scale cooling equipment that uses water as a circulating coolant. This equipment can absorb a large amount of heat through cold water and then evaporate it through water; Releasing hot air has achieved the purpose of cooling down. Therefore, cooling towers have been widely used in many places, but there are still many problems in our daily lives that have a serious impact on the use of our cooling towers, which are the daily maintenance methods and precautions for cooling towers.

Start of fiberglass cooling tower:

Start the water pump intermittently to completely exhaust the air in the circulating water pipe, and then start the fan.

1. Check if the inlet and outlet environments are normal when opening. Check if the wind direction is upward during the operation of the fan. 2. Adjust the water flow rate to the normal operating water flow rate of the water tower.

3. Check that the operating voltage and current of each phase of the motor do not exceed the values indicated on the motor nameplate. 4. The user's power circuit should have phase loss protection and overload protection measures. Precautions for using fiberglass cooling tower:

1. Open the drain valve of the water basin and clean the mud, dust, and dirt in the water. Rinse each component of the tower body.

2. Adjust the fan to make the angle of the fan blades consistent and the gap between the fan blades and the tower shell uniform. 3. Check whether each operating component operates flexibly.

4. Adjust the float valve to ensure that the water level is 20cm below the overflow outlet. Daily maintenance of the fiberglass cooling tower:

Fiberglass cooling towers use cooling water as the raw material for cooling, and the cooling water will produce a large amount of calcified substances during long-term use. These calcified substances deposited inside the cooling tower will not only affect its operation At the same time, it will also have a certain impact on the daily maintenance of the cooling tower. Therefore, it is necessary to carefully and timely clean the calcium deposits inside the cooling tower during daily maintenance to avoid serious effects of these calcium deposits on the cooling tower.

There are many methods to clean fiberglass cooling towers, and the traditional clear method is more suitable for a large number of cooling users. Using a scraper for cleaning can not only thoroughly remove the sediment inside, but also effectively prevent the regeneration of these calcified substances.